Current position > News detail
『displacement flow meter|vortex flow meter』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
1. Klippel R&D testing operation
Klippel R&D testing operation mainly includes the following process: Connect equipment: According to the operation manual of Klippel R&D measurement system, correctly connect the audio analyzer, amplifier, laser head, standard microphone, industrial computer and other components. The tested unit needs to be firmly fixed on the measuring bracket or turntable to ensure stability and accuracy during the testing process. Adjust the laser head and microphone: Adjust the position of the laser head so that the laser head indicator light turns green, indicating that the laser is aligned. Place the standard microphone under the laser head, align it with the measured unit, and ensure that the measured unit and each measuring device are connected correctly. Calibrate laser displacement meter: On the operation interface, enter the Main menu with Enter, select Displacement meter, and then select D for calibration. The laser needs to be aimed at a specific calibration grid. When the distance is displayed within the specified range, click OK to complete the calibration. Fix the horn and adjust the laser alignment: Fix the horn to ensure it is stable and not moving. Aim the laser at the reflective surface in the middle of the horn and use correction fluid or white stickers to enhance the reflection intensity. Adjust the distance until both the green and yellow lights are continuously on without flashing, indicating that the laser has been accurately aligned. Set test parameters and start testing: When conducting LPM small signal linear parameter testing, click on the corresponding test icon, create a new test item, and enter the file name. Set the test mode to LPM linear parameters and perform
2. Professional English words about car maintenance
(engine type) liquid cooled, inline, 4-cylinder, cargo (engine model) water-cooled, inline, 4-cylinder, carburetor type (engine) compression ratio (engine) displacement (engine) fuel (engine) 13 mode 13 working conditions 3rd gear 3rd gear 3-way seat 4WD control device 4WD indicator switch 4WD lamp switch 4WD switch 4WD switch 4WD switch 4WD switch Switch 5th synchronizer assembly. 5-speed synchronizer assembly 6PK belt 6PK multi wedge drive belt A/C compressor assembly A/C control assembly Air conditioning control device A/C&heater assembly. Air conditioning heater assembly A/C blower Air conditioning blower A/C clutch air conditioning compressor clutch A/C compressor MTG bracket air conditioning compressor installation bracket A/C control assessment. Air conditioning controller A/C housing assessment